I have a new ISR4331 Router with an LTE Adv WWAN NIM.
I've configured it similar configuration to the other routers in our fleet and attempted to configure the NIM.
However I can't get it to connect. When I run 'debug dialer' I get the following error:
000744: *Aug 14 17:03:42.894 WST: Ce0/1/0 DDR: re-enable timeout
000745: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: place call
000746: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: Dialing cause ip (s=0.0.0.0, d=188.8.131.52)
000747: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: Attempting to dial lte
000748: *Aug 14 17:03:43.894 WST: Ce0/1/0 DDR: Unable to dial lte.
Here is my 'sh run' with the LTE config
controller Cellular 0/1/0
lte sim data-profile 1 attach-profile 1 slot 0
lte modem dm-log output local-uf
lte modem dm-log rotation
lte modem link-recovery rssi onset-threshold -110
lte modem link-recovery monitor-timer 30
lte modem link-recovery wait-timer 30
lte modem link-recovery debounce-count 20
track 1 ip sla 1 reachability
delay down 3 up 3
ip address negotiated
dialer idle-timeout 0
no ip address
ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
Can anyone help me get it working?
Thanks in advance.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: