Mac authntication in cisco acs 3.0

[Rashmiranjan jena]

Hello frineds'

I have one cisco acs server verson 3.0 and i want to enable mac binding in my all cisco switches in my network through radius.Any one have idea to implement to my network.

if you have any document ,pleaease share with me

please tell me the step by step procedure to implement.

Thank's

rashmiranjan jena

[paul driver]

Hello

Mac authentication using acs would be going down the path of 802.1x port based authentication

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/ht_8021x.html

But you there are good Security features without using ACS.

Port-security with ip soure-guard - http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_25_see/configuration/guide/swdhcp82.html#wp1149171

Dynamic arp inspection. - http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_25_see/configuration/guide/swdynarp.html

res

Paul

Please don't forget to rate any posts that have been helpful.

Thanks.