cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
793
Views
0
Helpful
5
Replies

Many errors on interfaces

Greg Maaaag
Level 1
Level 1

Hi everyone!

I've got router as vpn-concentrator which receives vpn site-to-site connections from 10 branches with cisco 881 and cisco 1941.

I started cacti monitoring and found out that there are too many errors on interfaces.

[URL=http://imageshack.us/photo/my-images/268/vyatta.jpg/][IMG]http://img268.imageshack.us/img268/235/vyatta.jpg[/IMG][/URL]

how can i find out source of problem?

5 Replies 5

paolo bevilacqua
Hall of Fame
Hall of Fame

Post "show interface" in text form.

I forgot to mention that it's vyatta, debian + cli like cisco.

i restarted it 2 hours ago and this is the output:

show interfaces detail

eth0: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000

    link/ether 00:50:56:01:02:38 brd ff:ff:ff:ff:ff:ff

    inet 89.223.6.92/27 brd 89.223.6.95 scope global eth0

    inet6 fe80::250:56ff:fe01:238/64 scope link

       valid_lft forever preferred_lft forever

    RX:  bytes    packets     errors    dropped    overrun      mcast

    1110826966    1531399         69         97          0          0

    TX:  bytes    packets     errors    dropped    carrier collisions

     822821404    1317997          0          0          0          0

eth1: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000

    link/ether 00:50:56:01:02:37 brd ff:ff:ff:ff:ff:ff

    inet 192.168.240.12/24 brd 192.168.240.255 scope global eth1

    inet6 fe80::250:56ff:fe01:237/64 scope link

       valid_lft forever preferred_lft forever

    RX:  bytes    packets     errors    dropped    overrun      mcast

     265768994     704018         25         97          0          0

    TX:  bytes    packets     errors    dropped    carrier collisions

     543872981     866248          0          0          0          0

eth2: mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000

    link/ether 00:50:56:01:00:f5 brd ff:ff:ff:ff:ff:ff

    inet 192.168.181.12/24 brd 192.168.181.255 scope global eth2

    inet6 fe80::250:56ff:fe01:f5/64 scope link

       valid_lft forever preferred_lft forever

    RX:  bytes    packets     errors    dropped    overrun      mcast

       5977655      40004          1         97          0          0

    TX:  bytes    packets     errors    dropped    carrier collisions

       3151240      15922          0          0          0          0

l2tp0: mtu 1410 qdisc pfifo_fast state UNKNOWN qlen 100

    link/ppp

    inet 10.255.255.0 peer 192.168.180.104/32 scope global l2tp0

    Description: User: testuser (192.168.180.104)

    RX:  bytes    packets     errors    dropped    overrun      mcast

         15919        310          0          0          0          0

    TX:  bytes    packets     errors    dropped    carrier collisions

         15904        309          0          0          0          0

lo: mtu 16436 qdisc noqueue state UNKNOWN

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host

       valid_lft forever preferred_lft forever

    RX:  bytes    packets     errors    dropped    overrun      mcast

        111029       1792          0          0          0          0

    TX:  bytes    packets     errors    dropped    carrier collisions

        111029       1792          0          0          0          0

For Linux problems, ask some Linux forum.

it's cli based os which communicates with ciscos so i decided to look for the answer on cisco forum.

Is there any algorythm of troubleshootung such errors on ciscos?

Hi

You have incoming packet Drops and errors usualy this Points to cabeling or Switch problems.

Sent from Cisco Technical Support iPhone App

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card