Maximum Bandwidth Supported on the FE Interface for WAN link 1841 V02

[raryanto79]

Hi All,

We have an 1841 v02 router with a serial link of 20Mbps for internet leased line at the first time.

Last year, we got upgrade the internet bandwidth to 50 Mbps and still use same router.

Question:

1. Is it okay if use same router for bandwidth 50 Mbps?

2. What is the proper router model that should be used for bandwidth 50 Mbps if current router could not support the internet bandwidth 50 Mbps?

3. What is the impact with internet connection in end user?

4. What is the maximum WAN Bandwidth supported by 1841 v02? Is there any document from Cisco that stated about this thing?

Thanks for any guidance....

Regards,

Riko

[Joseph W. Doherty]

Disclaimer

The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.

Liability Disclaimer

In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.

Posting

http://www.cisco.com/web/partners/downloads/765/tools/quickreference/routerperformance.pdf

https://supportforums.cisco.com/sites/default/files/legacy/0/3/8/142830-white_paper_c11_595485.pdf