cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
281
Views
0
Helpful
0
Replies
Highlighted
Beginner

Modem Router AUX connectivity

Hi All
I am currently working on trying to configure a modem with one of our Cisco routers. At this time we have a modem that is connected but I am hoping to configure few more modems which will be used in other locations. The current modem is connected to the AUX port on the router. I have used the following command AT&F1S0=1&W in the past to configure the modem.I have received what seems to be a different version of the same modem and when using the same command it seems that the modem answers but the result I get on hyperterm screen are scribles. I am hoping someone knows a better command to get this working. . Can someone help. Thank you in advance.

Modem in use Hayes Accura External RS-232

Router Setup

  Tty Line Typ     Tx/Rx    A Modem  Roty AccO AccI  Uses  Noise Overruns  Int

      0    0 CTY              -    -      -    -    -     0     47    0/0      -

      1    1 AUX   9600/9600  - inout     -    -    -     0      0    0/28972   Tty Line Typ     Tx/Rx    A Modem  Roty AccO AccI  Uses  Noise Overruns  Int
      0    0 CTY              -    -      -    -    -     0     47    0/0      -
      1    1 AUX   9600/9600  - inout     -    -    -     0      0    0/28972
0 REPLIES 0