ā02-15-2012 02:17 AM - edited ā03-04-2019 03:16 PM
Hi Netpro
how to show all the module on the ASR 1004?
thanks
ā02-15-2012 05:19 AM
Hi,
Try this
show diag [all | chassis | slot | subslot] eeprom
show platform
I used this link
http://www.cisco.com/en/US/docs/ios-xml/ios/interface/command/ir-cr-book.html
HTH
Alex
ā02-15-2012 09:25 AM
Hi Alex
I got "Forbiden Application"
Pls can u doenload and submit it
can u help me to administer a BGP Router connected to 2 different ISPs we r ucing public real as
thanks
ā02-16-2012 01:16 AM
ā02-17-2012 02:09 AM
thanks alex
ā10-21-2013 01:28 PM
I believe you have to specify on CLI 'card type' and then you will be able to see the serial interfaces. I ran into this same thing when I was installing a t3 sub module.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide