cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco announces new innovations in SD-WAN, ISRs, SD-WAN Services, and Catalyst 9000 Series switches


134
Views
0
Helpful
3
Replies
Beginner

MPLS Deployment Basics Steps (Production)

Hi all,

 

My organization has been recently flirting with the idea of deploying mpls for one of client's with multiple sites.

Can anyone here please, provide me with a documentation on how to go about this: From the ISP vantage point to the Client's.

I know and understand basic mpls on a technical level but applying that knowledge in real-life is where I am in the dark.

 

Thanks all

3 REPLIES
Highlighted
Collaborator

Re: MPLS Deployment Basics Steps (Production)

Start with nice guide from roger

 

https://www.rogerperkin.co.uk/ccie/mpls/cisco-mpls-tutorial/

 

BB
*** Rate All Helpful Responses ***
Beginner

Re: MPLS Deployment Basics Steps (Production)

Thanks so much  Balaji.

Will check it out.

 

Thanks

 

VIP Advisor

Re: MPLS Deployment Basics Steps (Production)

Hello

TBH  for a L3 mpls vpn solution you wouldn't have to worry about the mpls vpn setup at all, as all this would probably be provided by your ISP via their provider edge (PE)  label switched rtrs (LSR) into its own mpls backbone.

 

Only what you need to do is either statically or dynamically apply some routing on your customer edge (CE)  rtrs that connect to your ISP's PE rtrs.



kind regards
Paul

Please don't forget to rate any posts that have been helpful.
CreatePlease to create content
Ask the Expert- Introduction to Network Design