Hi Team, I am working on MPLS TE tunnels and trying to make a tunnel to steer traffic dynamically with autoroute in my eve lab setup between an XR and XE. I can see in XR side the tunnel is selected in rib and cef where as in xe side not. ( I can see tunnel is up and signaled as well). Can anyone please help me.
Output from the XE side tunnel is below R5
R5#show mpls traffic-eng tunnels
P2P TUNNELS/LSPs:
Name: R5_t1 (Tunnel1) Destination: 10.1.1.1
Status:
Admin: up Oper: up Path: valid Signalling: connected
path option 1, type dynamic (Basis for Setup, path weight 2)
Config Parameters:
Bandwidth: 1000 kbps (Global) Priority: 4 2 Affinity: 0x0/0xFFFF
Metric Type: TE (default)
Path-selection Tiebreaker:
Global: not set Tunnel Specific: not set Effective: min-fill (default)
Hop Limit: disabled
Cost Limit: disabled
Path-invalidation timeout: 10000 msec (default), Action: Tear
AutoRoute: disabled LockDown: disabled Loadshare: 1000 [2000000] bw-based
auto-bw: disabled
Fault-OAM: disabled, Wrap-Protection: disabled, Wrap-Capable: No
Active Path Option Parameters:
State: dynamic path option 1 is active
BandwidthOverride: disabled LockDown: disabled Verbatim: disabled
Node Hop Count: 2
InLabel : -
OutLabel : GigabitEthernet1.3, 24017
Next Hop : 172.16.35.3
RSVP Signalling Info:
Src 10.5.5.5, Dst 10.1.1.1, Tun_Id 1, Tun_Instance 8
RSVP Path Info:
My Address: 172.16.35.5
Explicit Route: 172.16.35.3 172.16.13.1 10.1.1.1
Record Route: NONE
Tspec: ave rate=1000 kbits, burst=1000 bytes, peak rate=1000 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=1000 kbits, burst=1000 bytes, peak rate=1000 kbits
History:
Tunnel:
Time since created: 1 days, 6 hours, 50 minutes
Time since path change: 1 days, 6 hours, 50 minutes
Number of LSP IDs (Tun_Instances) used: 8
Current LSP: [ID: 8]
Uptime: 1 days, 6 hours, 50 minutes
Prior LSP: [ID: 4]
ID: path option unknown
Removal Trigger: path verification failed
LSP Tunnel XR1_t1 is signalled, connection is up
InLabel : GigabitEthernet1.3, implicit-null
Prev Hop : 172.16.35.3
OutLabel : -
RSVP Signalling Info:
Src 10.1.1.1, Dst 10.5.5.5, Tun_Id 1, Tun_Instance 5
RSVP Path Info:
My Address: 10.5.5.5
Explicit Route: NONE
Record Route: NONE
Tspec: ave rate=1000 kbits, burst=1000 bytes, peak rate=1000 kbits
RSVP Resv Info:
Record Route: NONE
Fspec: ave rate=1000 kbits, burst=1000 bytes, peak rate=1000 kbits
P2MP TUNNELS:
P2MP SUB-LSPS:
R5#
CEF & RIB
R5#show ip cef 10.6.6.6/32
10.6.6.6/32
nexthop 172.16.35.3 GigabitEthernet1.3 label 24012-(local:21)
nexthop 172.16.45.4 GigabitEthernet1.4 label 24010-(local:21)
R5#show ip route 10.6.6.6
Routing entry for 10.6.6.6/32
Known via "ospf 1", distance 110, metric 4, type intra area
Last update from 172.16.45.4 on GigabitEthernet1.4, 1d06h ago
Routing Descriptor Blocks:
172.16.45.4, from 10.6.6.6, 1d06h ago, via GigabitEthernet1.4
Route metric is 4, traffic share count is 1
* 172.16.35.3, from 10.6.6.6, 1d06h ago, via GigabitEthernet1.3
Route metric is 4, traffic share count is 1
R5#
