02-22-2012 02:26 AM - edited 03-04-2019 03:23 PM
Hi All
We have a number of 2651XM with WIC-1ADSL. These are supplied by another company and we do not have access to the configs.
We are told that the maximum throughput from the ADSL WIC to the FastEthernet 0/1 is 2.5Mbps ( "it's a backplane issue" ), even though the ADSL speed reported by the router on the external interface is 8Mbps.
Has anyone any ideas or is there a paper that confirms this.
Ian
02-25-2012 06:28 PM
Hi ,
In the below Doc , look into the performance section and other parameters , let me know if this helps with your question.
http://www.cisco.com/warp/public/146/kits/smb/dsl_strategy/ADSL_WIC_ds.pdf
Ambuj
02-27-2012 12:43 AM
Thanks Ambuj
Sort of answers my question I must assume that the supplier has a lot of "variables" not working in their favour.
Ian
02-28-2012 05:14 PM
good to hear that
Don't forget to rate helpful posts and mark the thread as solved.
Regards.
Ambuj
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: