Need router solution with 12x1g SFP and 2x10G SFP

[jean jacques vigne]

Hello

Looking for a device with 48 DC dual supply, at least 12 ports 1G SFP monomode and 2 ports 10G SFP Monomode.

which one do you recommend ?

BR

JJv

[luis_cordova]

Hi @jean jacques vigne,

Maybe this modelo can help you:

WS-C3850-12S-E

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-3850-series-switches/datasheet_c78-720918.html

Obviously, you must compare the other models of the link to make the best decision

Regards

[Seb Rupik · Accepted solution]

Hi there,

I you wanted an router, the ASR1000 would be a good bet, however your port requirement doesn't quite fit what is offered by Cisco

You could have an ASR1001-X + 1 SPA which would give you 2x SFP+ and 11x SFP interfaces   ...one short.

The next chassis up which meets your requirement is a ASR1004, this comes with no built-in ports so you'd need to build the port spec from SPAs:  1x SPA-10X1GE-V2, 1x SPA-2X1GE-V2, 2x SPA-1X10GE-L-V2  ... 12x SFP and 2x SFP+

https://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/datasheet-c78-731632.html

https://www.cisco.com/c/en/us/products/collateral/routers/asr-1002-router/data_sheet_c78-443175.html

cheers,

Seb.

[Joseph W. Doherty]

Must it be a router or could a L3 switch do the job too?

Must it have on-board DC power supplies or might you use an external DC to AC inverter?

No other requirements other than the ports needed? Wire-speed for all ports or is less capacity okay?