05-01-2017 02:37 AM - edited 03-05-2019 08:26 AM
Hi Currently we are using two cisco 4500 series switches, and m confused that with below software and hardware information, Can I configure the VSS.
Switch 1:
License Information for 'WS-X45-SUP7-E'
License Level: ipbase Type: Permanent
Next reboot license Level: ipbase
cat4500e-UNIVERSAL-M), Version 03.04.06.SG RELEASE SOFTWARE (fc1)
Switch 2:
License Information for 'WS-X45-SUP7-E'
License Level: ipbase Type: Permanent
Next reboot license Level: ipbase
cat4500e-UNIVERSAL-M), Version 03.04.06.SG RELEASE SOFTWARE (fc1)
Thanks in Advance
05-01-2017 02:52 AM
03-25-2018 11:42 PM
This describes how to configure a virtual switching system (VSS) for the Catalyst 4500/4500X series switch (Supervisor Engine 7-E, Supervisor Engine 7L-E, and Catalyst 4500-X). Cisco Release IOS XE 3.4.0SG and later releases support VSS.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/15-1-2/XE_340/configuration/guide/config/vss.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide