Hi!
I have such input data:
2xN7K-C7010 - Nexus7000 C7010 (10 Slot) Chassis
2xN7K-M132XP-12 - 32x10Gbps
NX-OS version 6.1(1)
I have enable (by default) QoS feature on them:
N7k# show policy-map interface brief
Interface/VLAN [Status]:INP QOS OUT QOS INP QUE OUT QUE
================================================================================
port-channel1 [Active]: default-in-po default-out-p
port-channel2 [Active]: default-in-po default-out-p
port-channel10 [Active]: default-in-po default-out-p
Ethernet1/1 [Active]: default-in-po default-out-p
Ethernet1/3 [Active]: default-in-po default-out-p
Ethernet1/4 [Active]: default-in-po default-out-p
Ethernet1/5 [Active]: default-in-po default-out-p
Ethernet1/7 [Active]: default-in-po default-out-p
Ethernet1/8 [Active]: default-in-po default-out-p
Ethernet1/19 [Active]: default-in-po default-out-p
and so on.
But I couln't see any QoS statistics on both Nexus devices:
N7k#
show policy-map interface ethernet 1/1
Global statistics status : enabled
Ethernet1/1
Service-policy (queuing) input: default-in-policy
SNMP Policy Index: 301990537
Class-map (queuing): in-q1 (match-any)
queue-limit percent 50
bandwidth percent 80
queue dropped pkts : 0
Class-map (queuing): in-q-default (match-any)
queue-limit percent 50
bandwidth percent 20
queue dropped pkts : 0
Service-policy (queuing) output: default-out-policy
SNMP Policy Index: 301990546
Class-map (queuing): out-pq1 (match-any)
priority level 1
queue-limit percent 16
queue dropped pkts : 0
Class-map (queuing): out-q2 (match-any)
queue-limit percent 1
queue dropped pkts : 0
Class-map (queuing): out-q3 (match-any)
queue-limit percent 1
queue dropped pkts : 0
Class-map (queuing): out-q-default (match-any)
queue-limit percent 82
bandwidth remaining percent 25
queue dropped pkts : 0
N7k#
Does anybody know why?
Good day.
