06-07-2021 11:10 AM
Hi all,
Can somebody please help me understand what is being advertised from this router over ospf:
!
interface Loopback0
description ConnectionToBranch
ip address 10.16.7.254 255.255.255.255
!
!
router ospf 1
redistribute static subnets route-map STATIC-PERMIT
passive-interface Loopback0
network 10.16.7.254 0.0.0.0 area 0
network 10.255.0.0 0.0.255.255 area 0
distribute-list route-map LISTA in
!
ip route 0.0.0.0 0.0.0.0 10.16.253.1 130
ip route 10.0.253.2 255.255.255.255 10.16.253.1
ip route 10.16.0.0 255.255.0.0 10.16.253.1
ip route 10.16.0.0 255.255.248.0 10.16.252.1
ip route 10.30.254.2 255.255.255.255 10.16.253.1
!
!
ip prefix-list LISTA seq 10 permit 0.0.0.0/0
ip prefix-list LISTA seq 20 permit 10.30.7.254/32
!
ip prefix-list STATIC seq 10 permit 10.16.0.0/21
!
!
route-map STATIC-PERMIT permit 10
match ip address prefix-list STATIC
!
route-map LISTA permit 10
match ip address prefix-list LISTA
!
If I understand this correctly distribute-list is allowing everything to route table with permit 0.0.0.0/0? What is advertised to other router? What is the purpose of STATIC commands?
Thanks in advance.
06-07-2021 01:14 PM
If I understand this correctly distribute-list is allowing everything to route table with permit 0.0.0.0/0? What is advertised to other router? What is the purpose of STATIC commands?
we are not sure full topology you working on, based on this information -
distribute-list route-map LISTA in - you filtering the routes coming in
redistribute static subnets route-map STATIC-PERMIT - this matches your -ip prefix-list STATIC seq 10 permit 10.16.0.0/21
One of a good example explained here :
https://lpmazariegos.com/2016/04/01/ospf-filtering-part-iii/
06-07-2021 01:17 PM
not exactly, permit 0.0.0.0/0 without le or ge 32 means only default route. To permit All prefixes you need permit 0.0.0.0/0 le 32.
So, it looks like distribute-list route-map LISTA in permits default route o.o.o.o/o and 10.30.7.254/32; none others are permitted because of missing permit any (0.0.0.0/0 le 32) at the end of statement.
And, redistribute static subnets means redistribute static routes into osfp - you have 5 - but since there is route map attached ospf lets only 10.16.0.0/21 to be redistributed. STATIC seq 10 permit 10.16.0.0/21
Regards, ML
**Please Rate All Helpful Responses **
06-08-2021 01:43 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide