cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
481
Views
0
Helpful
1
Replies

Ospf learn time

acbennyma
Level 1
Level 1

Dear all,

How many seconds does a OSPF router take time to form an ospf neighbor ( Whatever is default broadcast mode or point to point mode )

Any cisco link can mention this.

1 Reply 1

Joseph W. Doherty
Hall of Fame
Hall of Fame

The      Author of this posting offers the information contained within this      posting without consideration and with the reader's understanding   that    there's no implied or expressed suitability or fitness for any    purpose.   Information provided is for informational purposes only  and   should not   be construed as rendering professional advice of any  kind.   Usage of  this  posting's information is solely at reader's own  risk.

Liability Disclaimer

In      no event shall Author be liable for any damages whatsoever    (including,   without limitation, damages for loss of use, data or    profit) arising  out  of the use or inability to use the posting's    information even if  Author  has been advised of the possibility of  such   damage.

Posting

Time will vary - bandwidth of connecting link, available bandwidth on connecting link, both routers control plane processing performance, how loaded the routers' CPU are, size of OSPF database, quality of connecting link, OSPF implementation, OSPF configuration, and MTU(?).  (That's probably most.)