11-13-2018 05:03 PM - edited 11-13-2018 06:33 PM
Hi Guys, I'm trying to do the Multi-Area OSPF in 5 routers.
It the first time that I do that. So, I don't know what am I doing wrong can someone help me?
Thanks a lot in advance
Topology
Build the following network. (multi-area OSPF, VLANs)
5 Routers with serial ports
2 Switches (switch attached to the last router on each leg)
1 end device attached to each switch
Network Leg A:
10.10.10.0/25; network host requirement is 100 devices
VLAN 100
Network Leg B:
172.16.20.0/26; network host requirement is 50 devices
VLAN 200
Configure multi-area OSPF and ping successfully from Leg A to Leg B.
Enable to pin from Pc1 to Router 1, Pc 2 to Router 2 and between the routers but I CANNOT ping between the pcs that is what I need to do.
Solved! Go to Solution.
11-13-2018 08:37 PM
Hi,
This is a duplicate post but here I am also going to attach a working lab.
Regards,
Deepak Kumar
11-13-2018 08:37 PM
11-14-2018 03:51 AM
Hello
Just like to add you can even go a step furhter as both areas are stubs, you can make them so.
router 2
router ospf 1
area 1 stub no-summary
router 1
router ospf 1
area 1 stub
router 4
router ospf 1
area 2 stub no-summary
router 5
router ospf 1
area 2 stub
11-14-2018 04:02 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide