I have a new OSPF connection to an external business partner. The OSPF
adjacency is FULL/DR and I can see LSA in database but nothing in the route table.
I have tried different OSPF network types but nothing works. I've looked at the Cisco doc here
http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481a.shtml
Still at a loss - any ideas guys ?
interface FastEthernet0/0
ip address 1.0.2.28 255.255.255.0
ip ospf 1 area 0
router ospf 1
log-adjacency-changes
network 1.0.0.0 0.255.255.255 area 0
r02#show ip ospf neighbor
Neighbor ID Pri State Dead Time Address Interface
1.255.0.48 10 FULL/DR 00:00:39 1.0.2.1
FastEthernet0/0
r02#show ip route ospf
r02#
r02#show ip ospf database route
OSPF Router with ID (192.168.250.218) (Process ID 1)
Router Link States (Area 0)
Adv Router is not-reachable
LS age: 439
Options: (No TOS-capability, DC)
LS Type: Router Links
Link State ID: 1.0.1.3
Advertising Router: 1.0.1.3
LS Seq Number: 8000481B
Checksum: 0xC6DF
Length: 48
AS Boundary Router
Number of Links: 2
Link connected to: a Transit Network
(Link ID) Designated Router address: 1.0.1.3
(Link Data) Router Interface address: 1.0.1.3
Number of TOS metrics: 0
TOS 0 Metrics: 1
Link connected to: a Stub Network
(Link ID) Network/subnet number: 1.1.1.0
(Link Data) Network Mask: 255.255.255.0
Number of TOS metrics: 0
TOS 0 Metrics: 1
Thanks in advance
