03-01-2020 10:30 AM - edited 03-03-2020 02:32 PM
Hi,
I configured Site to Site VPN in Packet tracer 7.3.0 between two 2901 routers. I Saved the running Conf to startup-config. But When turn OFF and turn ON the physical switch of the router my all VPN configurations are gone in the startup-config. If I reload the router using the Reload command, I'm not facing this issue. And I'm not facing this with 4321 routers.
I believe this could be a bug. Correct me If I'm wrong
Thanks,
Joshua X P
Solved! Go to Solution.
03-04-2020 02:41 AM
Hello,
same here, so it seems to be a bug indeed. It seems to still be in the startup-config after the power down/up (sh startup-config). If you do a 'copy startup-config running-config' after the powe down/up, it should be back...
03-03-2020 11:05 PM
Hello,
could be a bug indeed. Can you post the zipped .pkt file ?
03-04-2020 02:27 AM
03-04-2020 02:41 AM
Hello,
same here, so it seems to be a bug indeed. It seems to still be in the startup-config after the power down/up (sh startup-config). If you do a 'copy startup-config running-config' after the powe down/up, it should be back...
03-04-2020 02:48 AM - edited 03-04-2020 02:50 AM
Thanks for the solution!
I hope Cisco would fix this bug in next update.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide