PBR behaviour

[JACQUES DU PLESSIS]

Hi Guys,

I have a old 4500 with Sup 5 10GE. Two ISPs are connected there, and I need PBR to route traffic to the correct one depending on source. So I have a route-map with 2 set ip default next-hop commands in 2 sequences. However the 2nd sequence number does not work. Is there a limitation on the number of default next hops in a single route map?

Thanks

Jacques

[Richard Burts]

Jacques

I am not aware of a limitation on how many set ip default next-hop can be used in PBR. I suspect that there is some issue in your configuration. If you would post the details of how you are configuring PBR (and perhaps a bit more about your topology) then perhaps we might help you identify the problem.

HTH

Rick