03-19-2014 05:46 AM - edited 03-04-2019 10:37 PM
We've upgrade a 7206VXR from Version 12.3(14)T7 IP PLUS Feature Set to 15.2-4.M5 SP Services. Since the upgrade we're no longer getting policy maps applied to the Virtual access interfaces. The policy is applied via a "cisco-avpair="ip:sub-policy-Out=parent" via radius upon the sessions authentication.
The policy configurtion is as follows
policy-map parent
class class-default
shape average percent 100
service-policy child
policy-map child
class policyclass
bandwidth percent 50
class class-default
class-map match-any policyclass
description match packets dscp marked af21
match access-group name name
Any thoughts?
03-23-2014 12:20 PM
Apply the config on virtual-template.
R1#show version | i IOS
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)
R1(config)#int virtual-access 1
% Please use virtual template to configure your virtual access
-Vishesh
03-24-2014 03:12 AM
Unfortunalty we're using Radius as we don't want the Policy applied to all users. This is a specific requirement for one of our customers.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: