cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
253
Views
0
Helpful
0
Replies
Highlighted

Plusnet dual DSL feeds into a Cisco 1900

     I have 2 independent dsl lines from Plusnet with static IP's that I am terminating on a 1900 router with two adsl WIC modules. I and trying to bundle/multilink/load balance the two lines to double the bandwidth. With my primary or secondary IP set on the dialer interface, one line can be used, but the supplier advised me to authenticate individually on each ATM interface with independant IP's but this doesn't seem to work. It only authenticates when the single IP and hostname and password are configured on the dialer. The supplier are not sure load balancing will work and are put off as I am not using their own supplied dsl routers. Anyone have any experience of this or a config guide to try would be useful as I am getting nowhere and it's looking like I might have to settle for a single dsl connection. Thanks, Eddie.              

Everyone's tags (5)
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards