cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
283
Views
0
Helpful
4
Replies

Port Channel 1 Interface down

Hi Team I have 1 Switch in office & another in data centre , Connected over Port channel. In port channel 2 switch interface each side is added. if 1 interface in either side will down  then port channel will be down? .

4 Replies 4

pman
Enthusiast
Enthusiast

Hi,


if 1 interface in either side will down  then port channel will be down? .




No, for the port channel to be down then the 2 ports on each side must be down

Ok Got it . both port should be down on either side  then only Port channel will be down .  If one interface down then other interface will carry traffic 

 

Hello

Correct..


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

MHM Cisco World
Advisor
Advisor

if you config min-link and this interface make the number of link less than this value the port-channel will be down.
check this point.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: