10-09-2012 10:58 PM - edited 03-04-2019 05:48 PM
Hello
ISP provided Internet link over a Wimax Device. The switchport on which the wimax is terminated keeps changing from Orange to Green.
Initially we kept speed and duplex auto but no luck then we changed as per wimax team informed to speed 10 duplex full but still the same issue
config on port
interface GigabitEthernet0/48
description WIMAX_IN_881
switchport access vlan 5
switchport mode access
speed 10
duplex full
kindly input to overcome this
thanks
ST
10-09-2012 11:30 PM
HI Saquib,
Try with
speed auto
duplex auto/Full
let me know the results.
Regards
Please rate if iot helps.
10-10-2012 12:15 AM
Hi Sandeep
Thanks for replying, if you see the original post I already mentioned testing speed auto / duplex auto didnt help
troubleshooting also included duplex full but no luck
Not sure what more to look out
thanks
ST
10-10-2012 01:02 AM
Hi Saquib,
Have you try with speed auto, duplex full?
if still not working then call to your ISP provider and tell them to open the port from there side.
Regards
Please rate if it helps.
10-10-2012 01:15 AM
Hi Sandeep
What you mean by open the port from ISP end.
WIMAX device is installed on the Top of the building and a UTP cable is drop to the datacenter.
10-10-2012 01:19 AM
1. check UTP cable., if its ok then contact ISP.
Means check the setting of device from ISP end.
They only can resolve the issue.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide