I am in need of some help. I have a RDP server on my network that I have set up for external access from the internet. I have also configured my router to forward in the nessecary locations and opened up the right ports or so I thought. I have enabled CBAC on my router to inspect all interfaces inbound and outbound traffic and applied an access list allowing traffic in on ports 443 and 80 to my outbound interface pointing inbound. Yet I am still unable to navigate to the website or IP address externally. I went to "sheilds up!" at grc.com to test my opened ports and they are still saying those two ports are closed. Am I missing something on my access list that wouldn't allow port 443 or 80 based traffic to converse that interface.
Starting from NFVIS 3.12 versions, the deploy option does not depict all the SR-IOV VFs(Virtual Functions) available in a physical interface. This change is introduced as (i) the number of VFs of ENCS platform on LANs side is increased to 24 and (ii) the...
Community Live- Getting to know Cisco SD-WAN
(Live event - formerly known as Webcast- Wednesday December 11, 2019 at 10 am Pacific/ 1 pm Eastern / 7 pm Paris)
This event will have place on Wednesday 11th, December 2019 at 10hrs PDT
Hi alli have 40 spots (40 Ethernet cables for computers coming out from switch) and i want each of these spots to have fix IP which means if i swap the computer the IP of certain spot remain the same.example : at spot 30 i have IP address of 192.168.22.40...
Cisco DNA Center nodes lost network connectivity. Cannot SSH to nodes. Cluster and Enterprise port connected to Cisco Nexus Switches.
Cisco DNA Center kernel logs showing hung queue error messages. "sudo cat /var/log/kern.log"
Cisco Digital Network Architecture Center Modules(Design Module)Wireless Part.In this article, we are going to talk about Cisco Digital Network Architecture Center design Module, Wireless Part.Cisco DNA Center gives us the flexibility and scalability to c...