PPOE on 2901 Router

[avilt]

I have a 2901K ISR router IOS Version 15.0(1r)M12 and I will be using this as a internet router, The WAN interface will get dynamic IP from the ISP, so I need to configure PPOE.  I am referring the following link for setting up PPOE.

http://www.dslreports.com/faq/8199

However I am unable to define PPOE protocol as shown below

INTERNETRTR(config)#!!!!! Configure Router as PPPoE Client to the ISP

INTERNETRTR(config)#vpdn enable

INTERNETRTR(config)#vpdn-group 1

INTERNETRTR(config-vpdn)#request-dialin

INTERNETRTR(config-vpdn-req-in)#protocol ?

  l2tp  Use L2TP

INTERNETRTR(config-vpdn-req-in)#

Appreciate your advise/link for setting up PPOE on 2901 series router.

[paolo bevilacqua]

The documentation that references these commands is obsolete. You don't need them.