An ISP rebooted their internal PPPOE Server and now a client's ASA is not able to get back L3 connectivity. L2 appears just fine. I've cycled the interface and the onsite people have rebooted the bridged ISP modem, but so far nothing is working to get this connection back online. Onsite techs plugged a laptop into the ISP modem and were able to get to the Intnernet.
Note this configuration is a little unusual in that it has two pppoe connections. The other one is working.
Thanks for your reply. Two pppoe connections the same ASA not load balancing not failover.
We were able to get the primary connection back in service. If you are interested in the details, please see SR 626031471 and the original setup SR 624947349.
Basically we had to remove the configuration for the secondary interface so that the first default route would get successfully instantiated again. Then we added the second interface route which was how this very unusal setup was done orignally.
When the problme occcurred both interfaces were up but sh vpdn pppinterface showed the secondary was id =1 and the primary was id = 2 and the primary needed to be number 1 otherwise the lower cost default route was missing. The only way to see that route was with sh asp table routing.
Listen: https://smarturl.it/CCRS9E25 Follow us: twitter.com/ciscochampions
With applications and users everywhere, the networks are now, more than ever, being tasked with delivering consistent protection while providing an exceptional user exper...
Listen: https://smarturl.it/CCRS9E24 Follow us: https://twitter.com/CiscoChampion
Cisco Radio Aware Routing addresses several of the challenges faced when merging IP routing and radio communications in mobile networks, especially those exhibiti...
Listen: https://smarturl.it/CCRS9E23 Follow us: https://twitter.com/CiscoChampion The Wi-Fi 6E Catalyst 9136 access point takes advantage of the 6-GHz band to produce a network that is more reliable and secure, with higher throughput, more ...
When moving from OSPFv2 to OSPFv3, there are many changes in the format of the LSAs Type, but the most known changes are: IP prefix informations are no longer carried in Type-1 LSA and Type-2 LSA, new LSAs Type 8 and 9 are added to carry these prefixes.