cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco announces new innovations in SD-WAN, ISRs, SD-WAN Services, and Catalyst 9000 Series switches


52
Views
0
Helpful
2
Replies
Beginner

PPPoE Server is not routing properly.

I have recently configured an ISR 4321 to act as a PPPoE server.  I have moved the configuration wholesale over from my old 1941 router.  Clients now are able to authenticate and get a PPPoE address, but are unable to reach the gateway, or indeed, anywhere else.

 

It strikes me there is probably something missing, but I can't figure it out.

 

Here's the configuration I have:

 

 

bba-group pppoe global
virtual-template 1
!
interface Loopback1
ip address 10.64.249.1 255.255.255.0
!
interface GigabitEthernet0/0/0.2009
description pppoe interface
encapsulation dot1Q 2009
pppoe enable group global
!
interface Virtual-Template1
description pppoe interface
mtu 1492
ip unnumbered Loopback1
peer default ip address pool PPPnet
keepalive 300
ppp authentication pap chap
ppp ipcp dns 10.64.1.2
!
ip local pool PPPnet 10.64.249.101 10.64.249.199
!

 

Everyone's tags (1)
2 REPLIES
Highlighted
VIP Advisor

Re: PPPoE Server is not routing properly.

Hello


@netopia wrote:

 Clients now are able to authenticate and get a PPPoE address, but are unable to reach the gateway, or indeed, anywhere else.


From ppoe client does it have a default route?

sh ip route 

 

If not either apply a static default route or enable an ipcp default to the client dallier interface

conf t
ip route 0.0.0.0 0.0.0.0 dialer x

or

int dialer x
ppp ipcp route default   <--restart interface after applying



kind regards
Paul

Please don't forget to rate any posts that have been helpful.
Beginner

Re: PPPoE Server is not routing properly.

I've got a default route on my client (it's not a cisco product), so it's not the route for the client.

CreatePlease to create content
Content for Community-Ad

Blog-New Labels