cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1399
Views
0
Helpful
5
Replies
Highlighted

PPPOE Server

Hi everyone..

i have a (Cisco router and 50 PCs),  i wanna to configure  a pppoe server on my router and create users in pppoe server for my PCs.

can anyone help me how to configure pppoe server and how create the users to the PCs?

5 REPLIES 5
Highlighted
Advisor

What sort of router do you have?

To confirm; you want the users to use PPPoE to connect to your router, as opposed to having the router connect via PPPoE to your ISP?

Highlighted

the router is 2800

the connection between the router and the ISP is via static route, yes i wanna the PCs connect to the router via pppoe.

Highlighted

Something like:

aaa new-model
aaa authentication ppp default local

ip address-pool local

vpdn enable
vpdn logging
vpdn logging local
vpdn session-limit 300
!
vpdn-group pppoe
accept-dialin
protocol pppoe
virtual-template 1

virtual-template 1 pre-clone 50

interface Gigabit x/y/z
description Interface facing clients
pppoe enable

interface Virtual-Template1
description PPPoE users get a Virtual-Access interface cloned from this
ip unnumbered Gigabit x/y/z (above interface)
ip mtu 1492
no peer default ip address <<-- this will need changing to use below
ppp authentication pap
ppp timeout idle 14400 either

ip local pool pppoe a.b.c.d a.b.c.z

Highlighted

dear Philip D'Ath

do you have a link or documentation talking about the configuration?

I'm very thankful for helping me.

Highlighted

No.  Also note you will need a "data" licence (now called an "AX" licence) to make it work.