cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2245
Views
15
Helpful
7
Replies

Problem in ASR-903 Upgrade - ' .rommon_upgrade/rommon.bin no found'

Diego_S
Level 1
Level 1

Hello community,

I'm facing the following problem, I appreciate if you can help me.
I am upgrading ROMMON from an ASR-903 from version 15.6(43r)S to 15.6(48r)S. and the following process was carried out:

ASR-903#upgrade rom-monitor filename bootflash:IOS-3.18.8aSP/asr900_15_6_48r_s_rommon.pkg all

Upgrade rom-monitor on Route-Processor 0

Target copying rom-monitor image file
Checking upgrade image...
1966080+0 records in
3840+0 records out
Upgrade image MD5 signature is 
Burning upgrade partition...
1966080+0 records in
1966080+0 records out
Checking upgrade partition...
1966080+0 records in
1966080+0 records out
Upgrade flash partition MD5 signature is 
ROMMON upgrade complete.
To make the new ROMMON permanent, you must restart the RP.
ASR-903#sh pla
ASR-903#sh platform
Chassis type: ASR-903

Slot Type State Insert time (ago)
--------- ------------------- --------------------- -----------------
0/0 A900-IMA2Z ok 00:02:57
0/1 A900-IMA2Z ok 00:02:56
0/3 A900-IMA8S ok 00:02:55
0/4 A900-IMA8S ok 00:02:55
R0 A900-RSP2A-64 ok, active 00:05:11
F0 ok, active 00:05:11
P0 A900-PWR550-A ok 00:04:29
P1 A900-PWR550-A ok 00:04:27
P2 A903-FAN-E ok 00:04:24

Slot CPLD Version Firmware Version
--------- ------------------- ---------------------------------------
R0 1905200E 15.6(43r)S
F0 1905200E 15.6(43r)S

ASR-903#wr
Building configuration...

[OK]!

ASR-903#reload
Proceed with reload? [confirm]
Aug 27 00:39:39.906 R0/0: %PMAN-5-EXI

System Bootstrap, Version 15.6(43r)S, RELEASE SOFTWARE (fc1)

Technical Support: https://protect-eu.mimecast.com/s/5ODNCGZ1ou0gDDWluY_Dse?domain=cisco.com

Copyright (c) 2020 by cisco Systems, Inc.

Compiled Mon 18-May-20 03:52 by pallavik

Initializing the PCI..

PCIe link training done..FPGA vendor ID[0x5f1137]

pci configuration done..

RSP2-64 P2 Board(1200 MHz). FPGA-325T


Current image running: Boot ROM0

Last reset cause: RSP-Board

Rommon upgrade requested

Directory .rommon_upgrade/rommon.bin not found

Unable to locate .rommon_upgrade/rommon.bin directory

Unable to load .rommon_upgrade/rommon.bin


Failed to upgrade ROMMON

Configuring zarlink...

Cylon-1 vendor ID[0x5e1137]

Cylon-2 vendor ID[0xffffffff]

pci configuration done..

Cylon Detected Success

C-Inlet temp 32C

UEA platform with 3670016 Kbytes of main memory


Rommon upgrade requested

Maximum upgrade attempts exceeded, continuing with old Rommon...

Located IOS-3.18.8aSP/packages.conf

What problem should be the source of the output shown:

Directory .rommon_upgrade/rommon.bin not found

Unable to locate .rommon_upgrade/rommon.bin directory

Unable to load .rommon_upgrade/rommon.bin


Failed to upgrade ROMMON?

 

7 Replies 7

Mark Elsen
Hall of Fame
Hall of Fame

 

 - Ref : https://www.cisco.com/c/en/us/td/docs/routers/asr903/upgrade/guide/b-upgrade-3x-16x-asr900/m-upgrade-rommon-rsp-asr900.html#Cisco_Task_in_List_GUI.dita_f4b5ec41-239f-45af-a1c8-15c8f3862e13 , following Steps 2 and Steps 3 accordingly the pkg file must be in root-directory of bootflash. Try accordingly and or follow exact command sequence.

 M.



-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Is it possible then that the reported error is due to the .pkg file not being directly in the bootflash: but in the bootflsh:IOS-3.18.8aSP/ directory?
And referring to the command, it must be applied:
upgrade rom-monitor filename bootflash:asr900_15_6_48r_s_rommon.pkgall

instead of:

upgrade rom-monitor filename bootflash:asr900_15_6_48r_s_rommon.pkg all
?

- Just put the pkg file in the root directory of bootflash. The pkgall is a
typo, there needs to be a space indeed.

M.


-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

So the complete output would be:

#upgrade rom-monitor filename asr900_15_6_48r_s_rommon.pkg all

right?

 

Use bootflash:asr.... as filename .

M.


-- Let everything happen to you  
       Beauty and terror
      Just keep going    
       No feeling is final
Reiner Maria Rilke (1899)

Thank you for your help.
I will do it this way.

I did it this way and the problem continued.

Same output:

Rommon upgrade requested

Directory .rommon_upgrade/rommon.bin not found

Unable to locate .rommon_upgrade/rommon.bin directory

Unable to load .rommon_upgrade/rommon.bin

Failed to upgrade ROMMON