08-10-2005 09:24 AM - edited 03-03-2019 10:14 AM
I have a 3640 router with 12.1 IOS Version when i am installing NM-2FE-2W-V2, the router is not detecting the Module. is there a patch to fix this problem or someone can provide me 12.2 version IOS supporting Voice & BGP
08-10-2005 10:44 AM
Can you paste a sh ver ? According to this doc,
http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00801aa71c.html
You should need only a 12.07XK for minimum.
08-10-2005 11:38 PM
IOS (tm) 3600 Software (C3640-IO3S56I-M), Version 12.1(5)T8, RELEASE SOFTWARE (
fc1)
TAC Support: http://www.cisco.com/cgi-bin/ibld/view.pl?i=support
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 07-May-01 19:58 by ccai
Image text-base: 0x60008950, data-base: 0x612EC000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (f
c1)
ROM: 3600 Software (C3640-IO3S56I-M), Version 12.1(5)T8, RELEASE SOFTWARE (fc1)
Abbar-Jed uptime is 6 minutes
System returned to ROM by power-on
System image file is "flash:c3640-io3s56i-mz_121-5_T8.bin"
cisco 3640 (R4700) processor (revision 0x00) with 45056K/4096K bytes of memory.
Processor board ID 26758246
R4700 CPU at 100Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software (copyright 1990 by Meridian Technology Corp).
8 Low-speed serial(sync/async) network interface(s)
8 Voice FXS interface(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Abbar-Jed# sh diag
Slot 0:
Unknown (type 919) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-21601-02
Board Revision : D0
Deviation Number : 0-8610
Fab Version : 01
PCB Serial Number : FOC09200SJG
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 97 41 01 00 C0 46 03 20 00 54 61 02
0x10: 42 44 30 80 00 00 21 A2 02 01 C1 8B 46 4F 43 30
0x20: 39 32 30 30 53 4A 47 03 00 81 00 00 00 00 04 00
0x30: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
Slot 1:
4 PORT Voice PM for MARs Port adapter
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware revision 1.1 Board revision K0
Serial number 26535649 Part number 800-02491-02
Test history 0x0 RMA number 00-00-00
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 65 01 01 01 94 E6 E1 50 09 BB 02 00 00 00 00
0x30: A0 00 00 00 01 11 29 17 FF FF FF FF FF FF FF FF
WIC Slot 0:
FXS Voice daughter card (2 port)
Hardware revision 1.1 Board revision A0
Serial number 26478606 Part number 800-02493-04
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0E 01 01 01 94 08 0E 50 09 BD 04 00 00 00 00
0x30: 50 00 00 00 01 08 17 01 FF FF FF FF FF FF FF FF
WIC Slot 1:
FXS Voice daughter card (2 port)
Hardware revision 1.1 Board revision A0
Serial number 26478464 Part number 800-02493-04
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0E 01 01 01 94 07 80 50 09 BD 04 00 00 00 00
0x30: 50 00 00 00 01 08 17 01 FF FF FF FF FF FF FF FF
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide