07-06-2010 05:03 PM - edited 03-04-2019 08:59 AM
I m having a problem with my cisco 1841.
From the router i can ping external ip(4.2.2.2 or 187.103.200.1). but a user from vlan 11 can ping router wan interface 187.103.200.2 and default gw 172.25.11.1, but can't ping external ip.
Solved! Go to Solution.
07-07-2010 12:07 PM
Hi Vitor
Can you remove ip nat inside from Physical interface & configure the same one under all subinteface.
Can you post output of sh ver (IOS Ver.)
Regards
Chetan Kumar
07-06-2010 06:40 PM
Hi Vitor,
Looking at your config, is vlan 11 supposed be actually a /30 subnet or is it a typo?
interface FastEthernet0/1.11
description qi
encapsulation dot1Q 11
ip address 172.25.11.1 255.255.255.252
Reza
07-06-2010 07:53 PM
Reza,
it is right, because for this vlan there is only 1 valid ip, for the user.
07-06-2010 08:13 PM
Vitor,
the config seem no problem ,you can try done the following operation.
interface FastEthernet0/1.11
description qi
encapsulation dot1Q 11
ip address 172.25.11.1 255.255.255.252
ip nat inside
07-07-2010 10:53 AM
Wang,
Still not working, i think it is something on access-list.
07-07-2010 12:07 PM
Hi Vitor
Can you remove ip nat inside from Physical interface & configure the same one under all subinteface.
Can you post output of sh ver (IOS Ver.)
Regards
Chetan Kumar
07-27-2010 10:49 AM
Thanks!!!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide