Q count EIGRP non zerp

[spinning2008]

Hello I have an EIGRP with 10 neighbors but the Q cout is not zero is in 200. This is normal?. The cpu process is normal and memory too.

Thanks.

Mauro

[cadet alain]

Hi,

No this is not normal. You surely have a L2 problem like unidirectional link or an ACL blocking EIGRP packets.

Can you post sh ip ei nei output.

Regards.

Alain.

[spinning2008]

Thanks for answer:

this is the show ip eigrp neighbors:

SW/#show ip eigrp neighbors

IP-EIGRP neighbors for process 1

H   Address                 Interface   Hold Uptime   SRTT   RTO  Q  Seq Type

                                        (sec)         (ms)       Cnt Num

7   192.168.255.13          Vl400             14 2w2d            20   200  0  8188067

4   192.168.255.23          Vl400             14 2w2d            20   200  0  8188535

6   192.168.255.31          Vl400             14 3w6d            25   200  0  2095514

0   192.168.255.1           Vl400             14 3w6d            11   200  0  107399045

8   192.168.255.5           Vl400             14 5w1d            10   200  0  144717

5   192.168.255.32          Vl400             14 22w5d          50   300  0  3047946

3   192.168.255.2           Vl400             14 22w5d          18   200  0  11361322

2   192.168.255.11          Vl400             14 22w5d         17   200  0  12384301

1   192.168.255.4           Vl400             14 22w5d         12   200  0  1520360

SW_SVC100R0-2/SAGRERA#

I can't see any SRTT, this is  switch 3550

Regards,

Mauro.

[cadet alain · Accepted solution]

Hi,

Q count is zero what is  equal to 200 is RTO in msec. So far everything looks ok.

Regards.

Alain.

[spinning2008]

Hi Alain, no the seq number is 0,  the Q Count is 200.

Regards,

Mauro

[Dan-Ciprian Cicioiu · Accepted solution]

Hi Mauro ,

Alain is right , the Q is 0.

Take it from the end to start  : Seq , Q , RTO

On each row, the last number is the sequence ( the big number) , the q , then RTO.

Dan

[spinning2008]

Yes is truth. Thanks I'm blind.

Thanks for all.

Regards,

Mauro