Hi
My question is what QoS mechanisms are supported on this module? Basically it is a switch module and should support all L2 QoS features such as SRR or WRR queuing. But it could also add "routed" ports to the router chassis (with "no switchport" command). And it do accept policy-map with hierarchical QoS configuration in such mode. For example -
interface FastEthernet1/3
no switchport
bandwidth 10000
ip address 10.1.1.1 255.255.255.248
service-policy output 10Meg
policy-map 10Meg
class VOIP
priority 2048
class ROUTING
bandwidth 512
class SCAVENGER
police cir 1000000
class WWW
bandwidth 2048
class class-default
shape average 5000000
So we can see it accept LLQ, CBWFQ, shaping and police related commands. But it seems to me that absolutely nothing works except POLICE-related statements. So I wonder whether it is possible to make LLQ, CBWFQ and GTS working on this module? I use Cisco 3825 router with IOS version 12.4(24)T.
