06-05-2012 07:22 PM - edited 03-04-2019 04:34 PM
Has anyone experienced configuring radius authentication on Nexus 7k?
Any issues with it. I have heard once you have configured the radius you are only able to run show commands on it.
Can anyone please paste the sample configuration in used by someone.
Thanks.
Regards,
06-05-2012 08:17 PM
Radius Server is Steel Belted V 6.X
08-06-2013 02:42 PM
Hi,
I have the same issue with Nexus100v. As a user i can successfully authenticate however the level of privilidges is pretty much restricted to ping and traces. We are using Windows Server 2003r2, my same user and password are fine for Catalyst based switches. Configuration as follows, any help would be greatly appreciated.
aaa authentication login console group radius local
!
aaa group server RadServer
server 172.a.b.c
use vrf management
source-interface mgmt0
!
radius-server host 172.a.b.c key XXXXXX authentication
Regards
Darren
04-27-2017 07:56 AM
I had the same issue. The issue is with your Radius authentication server. IT needs to pass back to the Cisco device the login level. check out this article. It helped me fix my issue.
http://blog.skufel.net/2012/06/how-to-integrating-cisco-devices-access-with-microsoft-npsradius/
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide