I am looking for a recommendation on what hardware supports static NAT of duplicate address with a minimum of 16 ports.
The situation is 6 to 14 OEM devices in a group, with IP address 192.168.0.11 to 192.168.0.25, that needs to be accessible to data collection. And there are 4 to 16 groups of the same setup of devices. So each port of the network hardware needs to be connected to one group of devices. And each group mapped to 10.1.50.xxx.
Hello I am getting this following error and get ACTV, XPS and S-PWR LEDs amber then suddenly all LEDs are off: Booting...(use DDR clock 667 MHz)*** Coprocessor Unusable Exception ***PC = 0x00000000 00000000SP = 0x00000000 00000000Cause Reg...
Once Cisco DNA Center has provisioned the SD-Access devices to sites, the SD-Access fabric can be created. In the Cisco DNA Center UI, navigate to Provision > Fabric. This is where you create and manage your fabric domains and transits.]
Provision Discovered Devices
On the Cisco DNA Center UI, navigate to Provision page
Select the following devices and provision all the devices to Floor-1. During the provision workflow, Cisco DNA Center can only provision devices of similar family. We wi...