cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Join Customer Connection to register!
888
Views
0
Helpful
2
Replies
jaleelnp
Beginner

Redundant WAN Router setup

Dear,

I have designed and implemented my organisation with fully redundant/load sharing setup via BGP, but facing small issue like looping and my other remote site which are on same (MPLS cloud) BGP-AS are sending the traffic to only new Backup router which causing off-line to my remote sites.

diagram is attached for your understanding.

I believe expertise guideline and your valuable feedback will correct me to drive properly.

Regards,

Jaleel Ahmed.

2 REPLIES 2
ramkumar62
Beginner

Hi

Consider adding null routes to major subnet to avoid loops

Sent from Cisco Technical Support iPhone App

Marwan ALshawi
Advisor

Can you please provide some more details with routing configuration of both of the routers

For example are using the link with 4 m as back only for inbound traffic from remote sites

Are using as path prepending to achieve this !

Sent from Cisco Technical Support iPhone App