10-16-2020 09:38 PM - edited 10-17-2020 01:15 AM
hello everyone i need help. I'm still new to this.
i am trying to make network as shown above. i use static routing and i'm not setting VLAN .
i can ping from PC 0 router 0 to PC router 1 and 2. but i cant ping PC 0 to router 3 and vice versa. i have attached the pkt file.
is there something i need to fix? Thanks in advance.
Solved! Go to Solution.
10-17-2020 02:15 AM
Hello,
the problem was a simple typo in the IP address of interfast FastEthernet0/0 on Router 3.
interface FastEthernet0/0
--> ip address 172.168.3.1 255.255.255.0
duplex auto
speed auto
I changed that to:
interface FastEthernet0/0
--> ip address 172.16.3.1 255.255.255.0
duplex auto
speed auto
and everything is working. Revised file attached.
10-16-2020 10:43 PM
have you told pings how to get back to where they were send from?
eg on Router (orange)
ip route 192.168.1.0 255.255.255.0 fa0/1 (gets back to purple)
ip route 200.200.1.0 255.255.255.0 fa0/1 (gets back to green)
10-17-2020 01:21 AM - edited 10-17-2020 01:22 AM
yes i guess? i have attached the pkt file. please can you check it? thanks for the help
10-17-2020 12:25 AM
Hello,
post your zipped Packet Tracer project (.pkt) file.
10-17-2020 01:24 AM
i have attached the pkt file. i'm still new so please understand if something is still wrong. thanks for the help
10-17-2020 02:15 AM
Hello,
the problem was a simple typo in the IP address of interfast FastEthernet0/0 on Router 3.
interface FastEthernet0/0
--> ip address 172.168.3.1 255.255.255.0
duplex auto
speed auto
I changed that to:
interface FastEthernet0/0
--> ip address 172.16.3.1 255.255.255.0
duplex auto
speed auto
and everything is working. Revised file attached.
10-17-2020 03:29 AM
i have tried to fix it by search everything in google. i dont know if it just a simply typo. thank you good man.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: