Hi All,
I have a NM-16A/DM= for my RAS setup. One line (Async 48) I am using for Admin access and rest 15 lines (Async 33 to 47) for User Dial-in. Config is as follows:
!
interface Group-Async1
description "For RAS Dial-in Users"
ip unnumbered FastEthernet0/0
encapsulation ppp
no ip mroute-cache
async dynamic routing
async mode interactive
peer default ip address pool ip_pool
ppp authentication pap rsaauth
group-range 33 47
!
Now I would like to restricts Users dialing in to my RAS on the basis of SOURCE PSTN NUMBERS. Like we do in ISDN with #dialer caller. Any pointers how I can achieve this.
Thanx in advance.
Best Regards,
Vijayendra K. S.