router configuration

[sir_ulrick]

Hi everybody, 

I have a Cisco  and I need to sync this router with a PTP server in my network. Reading about this configuration, I found different configurations and profiles and I don't understand how setting it exactly. Neither I know if I need to configure the router in transparent mode (End-to-end transparent clock) to sync with the master clock (PTP server) .

Im trying to check configuration from these links but none works (from IE2000 switch from packet tracert, I didn't find any router to work with PTP from packet tracert)

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/system_management/521_n1_x/b_5k_System_Mgmt_Config_521N1x/b_5k_System_Mgmt_Config_521N11_chapter_0110.pdf

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5xx/timing-and-sync/63x/b-network-sync-r63x-ncs540/b-network-sync-r63x-ncs540_chapter_01.html

https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r6-1/sysman/configuration/guide/b-sysman-cg-asr9k-61x/b-sysman-cg-asr9k-61x_chapter_01100.html

https://www.cisco.com/c/en/us/td/docs/iosxr/ncs5500/sysman/63x/b-system-management-cg-ncs5500-63x/b-system-management-cg-ncs5500-63x_chapter_01100.html#topic_j2r_kz3_nbb

Thanks all

Regards

[Georg Pauwen · Accepted solution]

Hello,

looking at the command reference linked below, it looks like PTP is not supported at all on that platform...

https://www.cisco.com/c/en/us/td/docs/solutions/GGSG-Engineering/15-4-3M/config-guide/Configuration-Guide/AppendixCLI-Ref.html

[sir_ulrick]

Hi George,
thanks a lot for your quick reply. Ont this router is compatible, but I'm not sure about how set it using different links attached previously.

[Georg Pauwen]

Hello,

which PTP do you have available on the 5915 ?

[sir_ulrick]

Sorry, my bad.
I confused IOS version. You are right, is not compatible.