cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1117
Views
0
Helpful
3
Replies
Highlighted
Beginner

Router enters in ROMMON mode

Hi,

Our network is down, because of the problem in flash card. The router enters in ROMMON mode after restarting. Could anyone tell me the command to boot the router using the IOS stored in TFTP server. We are using 1841 router.

Everyone's tags (4)
3 REPLIES 3
Highlighted
Cisco Employee

Router enters in ROMMON mode

use tftpdnld

Here s the link for reference

http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_rommon.html#wp1070700

use tftpdnld -r option if the flash is not usable

Highlighted
Beginner

Router enters in ROMMON mode

HI Sabari,

Do u want to copy IOS from tftp server  ? if yes then please follow the below given steps:-

rommon1 > IP_ADDRESS=

rommon 2> IP_SUBNET_MASK=

rommon 3> DEFAULT_GATEWAY=

rommon 4> TFTP_SERVER=

rommon 5> TFTP_FILE=  < address of the tftpfile i.e.IOS>

rommon 6> tftpdnld

then yes when it cisco reconfirms to check that you are sure

HTH

MJ

Highlighted
Beginner

Router enters in ROMMON mode

Hi Sabri,

If problem is in your flash card then check with you internal TAC team.

HTH

MJ

CreatePlease to create content