Router Error Message

[ayman emara]

Dear All,

i have 2851 router and it is hanging when i login on it while it is hanging it gives me the following error message:

"

*Jan 10 12:08:29.336: %SYS-2-MALLOCFAIL: Memory allocation of 1544 bytes failed from 0x4245DC84, alignment 0

Pool: Processor  Free: 4972724  Cause: Memory fragmentation

Alternate Pool: None  Free: 0  Cause: No Alternate pool

-Process=  "SCCP Application", ipl= 0, pid= 336,  -Traceback= 0x419D2A0C  0x4008182C 0x40095F6C 0x4245DC8C 0x4246A17C 0x4241EB68 0x4242475C  0x40F182A0 0x40F1B8E8 0x40F078FC 0x40F092A4 0x43465FD4 0x43465FB8

"

can anyone help me in this

thanks in advance

Ayman

[sean_evershed · Accepted solution]

Hi,

You may have an IOS bug or have insufficient memory. See below a guide for troubleshooting memory problems:

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6f3a.shtml#tshoot2

Please remember to rate all posts that are helpful

[shyshanm]

Hi Ayman,

This could be a memory issue. Check the "show memory statistics" output for the available free memory.

-Shyam.