11-12-2009 12:13 AM - edited 03-04-2019 06:40 AM
Dear all,
help me its urgent
our 2811 router is connecte to PSTN Telco for Provisioning
at Serial Line on 0/1/1 through smart serial for the following configuration
interface Serial0/1/1
physical-layer async
no ip address
encapsulation slip
async mode interactive
line 0/1/1
login authentication prov
transport input all
transport output all
telnet transparent
stopbits 1
flowcontrol software
------------------------------------
with the command
telnet 10.100.0.37 2019
i could not get the link, i have to clear line 0/1/1 or restart the router
is there any remedy other than this
----------------------------------------------
ports open are like this 2887,54729)no where there is 2019,
ROUTER#sh ip sockets
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 --listen-- 10.100.0.43 2887 0 0 11 0
17 0.0.0.0 0 10.100.0.43 67 0 0 2211 0
17 10.193.208.183 53527 10.100.0.11 161 0 0 1 0
17 --listen-- 10.100.0.43 162 0 0 11 0
17 --listen-- 10.100.0.43 54729 0 0 1 0
17 10.193.208.181 162 10.100.0.11 49717 0 0 0 0
17 10.193.208.183 162 10.100.0.11 54603 0 0 0 0
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.193.208.247 162 10.100.0.11 58347 0 0 0 0
17 10.193.208.249 162 10.100.0.11 49818 0 0 0 0
17 10.193.209.41 162 10.100.0.11 58574 0 0 0 0
17 10.193.209.5 162 10.100.0.11 55960 0 0 0 0
17 10.193.219.64 514 10.100.1.54 50341 0 0 210 0
17 10.193.212.112 514 10.100.1.54 50097 0 0 210 0
17 10.193.212.112 162 10.100.0.11 58766 0 0 0 0
Proto Remote Port Local Port In Out Stat TTY OutputIF
17 10.193.219.64 162 10.100.0.11 53191 0 0 0 0
---------------------------
any other command i have to give on serial to workout like
absolute-timeout Set absolute timeout for line disconnection
dispatch-timeout Set the dispatch timer
exec-timeout Set the EXEC timeout
lockable Allow users to lock a line
logout-warning Set Warning countdown for absolute timeout of line
notify Inform users
11-12-2009 03:13 AM
Hello Cisco_blue,
try
line 0/1/1
no exec
Hope to help
Giuseppe
11-12-2009 05:29 AM
no it isnt working,
any other remedies
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide