08-25-2014 09:10 PM - edited 03-04-2019 11:36 PM
Need to select a router that can support upto 30 OSPF stub areas, with 3 or 4 routers in each stub area
Any advice gratefully recieved and how you calculated your answer .
Cheers
08-25-2014 09:23 PM
How big is your WAN link present/future?
08-27-2014 06:21 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
You normally size routers based on the transit traffic they need to process. There is workload due to supporting a dynamic routing protocol, such as OSPF, but how demanding that might be depends much on the logical topology and physical link stability. I don't recall reading any case studies providing guidelines for sizing for this aspect, but to worry you (laugh), I've seem link instability cause large chassis core routers to go into OSPF meltdown. (NB: they were brand X, which didn't have some of the OSPF stability features Cisco OSPF generally offers.)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide