I am trying to figure out how to route over an Ethernet drop. I have a hub and four spokes currently connected via P2P T1s. I am getting fiber from 2 different service providers here soon and was trying to get an idea of how the routing would take place over Ethernet instead of separate serial connection. I have one service provider that can drop fiber at 2 locations and another that can drop fiber at the other 2, handoff is Ethernet to me. I actually have 10 more sites but wanted to keep it small and I am hiring a Cisco CCNP/IE to do this but wanted to maybe get a jump.
How would I configure the 3845 to route to 2 different places via one drop and a bunch of different VLANS? How would I configure the 2811s to route on the other end via ethernet? I am using EIGRP routing
Current Setup (LAN side, WAN was/is just P2P, both ends ex: 10.201.201.5-6/255.255.255.252):
Hub
Cisco 3845
GE 0/0(WAN Provider 1, 100MB/s aggregate):
???
GE 0/1(WAN Provider 2, 100MB/s aggregate):
???
GE 1/0(LAN):
GE1/0.2: 10.10.2.254/24 management vlan, encapsulation dot1q 2
GE1/0.10: 10.10.10.254/24 voice vlan, encapsulation dot1q 10
GE1/0.192: 192.168.0.254/24 data vlan, encapsulation dot1q 192
Spokes
Site A Cisco 2811 Spoke 1, Provider 1 fiber 50MB/s
FE0/0(WAN):
FE0/1(LAN):
FE0/0.1: 10.2.101.254/24 management vlan, encapsulation dot1q 1
FE0/0.101: 10.1.101.254/24 data vlan, encapsulation dot1q 101
FE0/0.201: 10.1.201.254/24 voice vlan, encapsulation dot1q 201
Site B Cisco 2811 Spoke 2, Provider 1 fiber 50MB/s
FE0/0(WAN):
FE0/1(LAN):
FE0/1.2: 10.2.102.254/24 management vlan, encapsulation dot1q 2
FE0/1.102: 10.1.102.254/24 data vlan, encapsulation dot1q 102
FE0/1.202: 10.1.202.254/24 voice vlan, encapsulation dot1q 202
Site D Cisco 2811 Spoke 3, Provider 2 fiber 50MB/s
FE0/0(WAN):
FE0/1(LAN):
FE0/1.3: 10.2.103.254/24 management vlan, encapsulation dot1q 3
FE0/1.103: 10.1.103.254/24 data vlan, encapsulation dot1q 103
FE0/1.203: 10.1.203.254/24 voice vlan, encapsulation dot1q 203
Site E Cisco 2811 Spoke 4, Provider 2 fiber 50MB/s
FE0/0(WAN):
FE0/1 (LAN):
FE0/1.4: 10.2.104.254/24 management vlan, encapsulation dot1q 4
FE0/1.104: 10.1.104.254/24 data vlan, encapsulation dot1q 104
FE0/1.204: 10.1.204.254/24 voice vlan, encapsulation dot1q 204
