10-13-2016 01:38 AM - edited 03-05-2019 07:15 AM
Good morning to everybody,
A client of mine wants to make a site to site VPN connection ,with IPsec encrypted to the maximum with a dynamic multipoint VPN. I know about the existance of the VPN flex but we want it to be with dmvpn.
It has to give 100 bidirectional mb. It will be connected directly to internet, that is, without anything on its way.
I thought of a 2951-hsec but I don't know if it's the right one or it's not enough.
10-13-2016 04:25 AM
The 2951 would definitely be enough, with an IPSec throughput of about 300 Mbps. Be aware though that you need a SEC + HSEC license for that router.
10-13-2016 05:29 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages wha2tsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Cisco recommends a 2951 for up to 75 Mbps. Their recommendations tend to be conservative, but if you're dealing with 100 Mbps of encrypted traffic, you might want to go by Cisco's recommendations or upscale a level.
See the attachment for details on older ISR performance.
You might also look at the current 4K router series.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide