cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
496
Views
0
Helpful
1
Replies

RSP720-3C-GE / 7606 reload

Hi Experts,

Kindly, our node 7606 has been reloaded due to below log:

%CONST_DIAG-SP-2-HM_SUP_CRSH: Supervisor crashed due to unrecoverable errors, Reason: Failed TestSPRPInbandPing

(c7600rsp72043_rp-ADVIPSERVICES-M), Version 12.2(33)SRB2

Please advise.

Regards,

Ahmed Erfan

1 Reply 1

Jairo Osorio
Beginner
Beginner

I have the same problem with a 7606 router here is the output:

system power redundancy mode = redundant
system power redundancy operationally = non-redundant
system power total =     2669.10 Watts (63.55 Amps @ 42V)
system power used =       615.30 Watts (14.65 Amps @ 42V)
system power available = 2053.80 Watts (48.90 Amps @ 42V)
                        Power-Capacity PS-Fan Output Oper
PS   Type               Watts   A @42V Status Status State
---- ------------------ ------- ------ ------ ------ -----
1    PWR-2700-DC        2669.10 63.55  OK     OK     on 
2    none
                        Pwr-Allocated  Oper
Fan  Type               Watts   A @42V State
---- ------------------ ------- ------ -----
1    FAN-MOD-6HS         180.18  4.29  OK
                        Pwr-Requested  Pwr-Allocated  Admin Oper
Slot Card-Type          Watts   A @42V Watts   A @42V State State
---- ------------------ ------- ------ ------- ------ ----- -----
4    WS-X6548-GE-TX      125.16  2.98   125.16  2.98  on    on
5    WS-SUP32-GE-3B      154.98  3.69   154.98  3.69  on    on
6    unknown             154.98  3.69   154.98  3.69  on    on

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers