cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
197
Views
0
Helpful
3
Replies
Highlighted
Beginner

Same statics routes on Cisco 891

Can someone please help me? I don't seem to know why this router has two default routes in the running config. Please see below 

 

 

ro-1.gbr.amsterdam#show running-config | i ip route
ip route 0.0.0.0 0.0.0.0 192.168.1.254 254
ip route 0.0.0.0 0.0.0.0 192.168.1.254 254
ip route 10.74.254.0 255.255.255.0 10.10.10.2 name
ip route 10.74.254.77 255.255.255.255 10.10.10.2 
ip route 29.8.15.8 255.255.255.255 10.10.10.2

3 REPLIES 3
VIP Mentor

Re: Same statics routes on Cisco 891

Hello,

 

two default routes which are exactly the same don't make any sense to be honest. Since they both have an administrative distance of 254, they might have been used as a backup for a dynamic routing protocol at some point.

 

Do you have just that one 891 router in your network ?

Beginner

Re: Same statics routes on Cisco 891

Hi Gerog,

 

Yep just the single 891 in the network, I have no idea why the running config is displaying the two routes. I would have assumed that the router would have overwritten the old one instead of registering both

VIP Advisor

Re: Same statics routes on Cisco 891

Hello

Try deleting and re-adding - obviously if your remote admin making sure you dont permanently lose connection doing this



kind regards
Paul

Please rate and mark posts accordingly if you have found any of the information provided useful.
It will hopefully assist others with similar issues in the future
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards