10-20-2010 12:59 AM - edited 03-04-2019 10:10 AM
We have configured according to document 12490cfg_release_9.pdf
As the Ipv6 stateless autoconfiguration :
====================
interface Virtual-Template10
mtu 1280
no ip address
ipv6 enable
ipv6 nd prefix default infinite infinite off-link
no ipv6 nd ra suppress
ipv6 nd ra lifetime 21600
ipv6 nd ra interval 21600
ipv6 nd ra initial 3 4
end
=======================
But once sending to Mobile the autoconfiguration is not ‘set’
Options
- Type: MTU
- Length: 8 (08h)
- Value: 1280
- Type: Prefix Information
- Length: 32 (20h)
- Prefix length: 64 (40h)
- On-link flag not set
- Autonomous address-configuration flag not set
- Router flag not set
- Reserved 1: 00h
- Valid lifetime: 2592000 s
- Preferred lifetime: 604800 s
- Reserved 2: 00 00 00 00
- Prefix: 2001:236: :
===========================================
We are using version: System image file is "c7svcsami-g8ik9s-mz.124-22.YE.bin"
10-22-2010 12:10 PM
"ipv6 nd prefix " seems never work under virtual-template, I have changed to many options but the value of L and A still the same '0' in routing-adverstise..
11-08-2010 01:29 AM
fixed!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide