cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
289
Views
0
Helpful
0
Replies
Highlighted
Beginner

Set COS for in-band management on ASR901 interface vlan

I am trying to determine how to mark a p-bit of 2 for management traffic leaving an ASR901.  My configuration is in a ring topology, so I have 2 network facing ports and I am using in-band management.  I would like to mark both the management traffic (ssh, snmp, ntp, etc.) as well as MSTP BPDU's. 

It appears that the vlan interface that I am using for in-band management (interface vlan 2) will only accept CPL/control plane service policies and I don't see that there is any option for marking a p-bit in control plane policies.

Can anyone help with this?

bridge-domain 2

interface GigabitEthernet0/7

description "Network link to fes2402 e26"

media-type sfp

no negotiation auto

service-policy input NETWORK-input

service-policy output NETWORK-output

service instance 2 ethernet

  description MANAGEMENT

  encapsulation dot1q 2

  rewrite ingress tag pop 1 symmetric

  bridge-domain 2

interface GigabitEthernet0/6

description "Network link to fes12gcf e1"

load-interval 30

media-type sfp

no negotiation auto

service-policy input NETWORK-input

service-policy output NETWORK-output

service instance 2 ethernet

  description MANAGEMENT

  encapsulation dot1q 2

  rewrite ingress tag pop 1 symmetric

  bridge-domain 2

 

interface Vlan2

description IN-BAND-MANAGEMENT

ip address 10.170.13.153 255.255.255.224

end

Everyone's tags (5)
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards