cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
350
Views
0
Helpful
1
Replies

Shape VLAN ME3400

Xividar
Level 1
Level 1

Hi Guys,

I have an ME3400 passing various services up to our PE. One of the VLAN services is a PW, I would like to shape this to 20Mb on the ME3400's outgoing trunk to the PE, when I try and enter this as an Outbound Policy, I get "Match VLAN is not supported this interface".

What am I missing? :)

 

class-map match-all VLAN-100

match vlan 100

!

policy-map PW-SHAPE-20Mb

class VLAN-100

shape average 20000000

Thanks.

1 Reply 1

Giuseppe Larosa
Hall of Fame
Hall of Fame

Hello mrmeamotokeoto,

 

see the following related thread . It looks like it is a limitation of ME 3400 platform.

The suggested workaround is to classify frames and assign them to a qos-group on downstream ports using a different policy-map inbound.

On the uplink to the PE you can use class-maps that match the qos-group value in outbound in a dedicated policy-map.

 

https://community.cisco.com/t5/metro/per-vlan-traffic-shaping-on-me3400/m-p/860553

 

 

 

Hope to help

Giuseppe

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: