cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
744
Views
4
Helpful
4
Replies

Site to Site VPN between ASA 5520 and 857 Router

samirshaikh52
Level 2
Level 2

Hi Everyone,


I've got a Cisco ASA 5520 device at my work place which has been in use for about 6 months now.  I just recently purchased a Cisco 857 ADSL router for a branch office and have the internet up and  running, but am stuck getting the site to site VPN working.  I  want to configure it via the SDM and I'm new to setting up VPN's.

I will use ASDM to configure on ASA, but what needs to be changed on my config below to  get the VPN running.  I'm sure it has something to do with routing /  natting. The IPSEC / IKE policies should be mirrored on the ASA side.

Please help experts.

1 Accepted Solution

Accepted Solutions

Jennifer Halim
Cisco Employee
Cisco Employee

Here is a sample configuration between ASA and IOS router:

http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805e8c80.shtml

Please let us know if you need to know or have questios on anything specific.

Hope that helps.

View solution in original post

4 Replies 4

Jennifer Halim
Cisco Employee
Cisco Employee

Here is a sample configuration between ASA and IOS router:

http://www.cisco.com/en/US/products/ps5855/products_configuration_example09186a0080a9a7a3.shtml

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805e8c80.shtml

Please let us know if you need to know or have questios on anything specific.

Hope that helps.

Hi Halijenn

Thanks for your response.

When run Router SDM I dont see a VPN wizard in the window.

Please see the attached snap

Please kindly upgrade to SDM version 2.5, or alternatively, please use CLI to configure the site-to-site VPN.

Post Deleted

Review Cisco Networking for a $25 gift card